|
|
Apartment Building in Bystřice nad Pernštejnem
Schauer, Petr ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of this bachelor's thesis is project documentation for the new construction of an apartment building in Bystřice nad Pernštejnem. The solved object is located on the northwestern edge of the city. It is a three-storey non-basement building. On the second and third floors there are seven residential units, sizes 1 + KK and 2 + KK. On the first floor there are four garage spaces with cellars. It includes three separate cellars, utility room, carriage house and cleaning room. It is a brick building made of sand-lime bricks. The construction system is mixed and based on foundation strips. Ceiling structures are designed as monolithic ceiling slabs. The roofing is designed as a single-skin flat roof structure. The building is also equipped with an elevator and wheelchair access. In front of the building there are four outdoor parking spaces, one of which is for people with reduced mobility. Access to the building is possible through paved areas. The whole building is insulated with the ETICS system. Facade colors are designed in shades of white and gray with anthracite fillings of openings.
|
|
|
Apartment building Polička
Boušková, Zuzana ; Pilík, Václav (referee) ; Brzoň, Roman (advisor)
This bachelor thesis encompasses project documentation of build execution of a new apartment building. Designed building is located on the southeastern OKRAJI of Policka in a newly built location. The apartment building is designed as a detached building with three above-ground and one underground floor in a flat terrain. The building has a total of 9 residential units with layouts of 3 + KK, 2 + KK and 1 + KK. All apartments except the barrier-free have a terrace or loggia and each apartment has a cellar located in the basement of the house. In the basement there is also a technical room, workshop, bicycle and carriage house and a common room. The apartment building is based on reinforced concrete foundation strips. The vertical load-bearing structures are designed from ceramic blocks, in the basement from lost formwork. The ceiling structures are monolithic reinforced concrete slabs. Perimeter masonry above ground level is insulated with the ETICS contact thermal insulation system. The roofing of the building is solved by flat roofs, while above the 2nd floor it is a vegetation roof with a terrace, above the 3rd floor there will be a non-walkable flat roof with a waterproofing layer made of asphalt strips.
|
|
|
Apartment building in Olomouc
Zbořil, Dominik ; Různar, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of the bachelor thesis is the design and elaboration of the project documentation for construction for the apartment building. The proposed apartment building is located in Slavonín, a city district in Olomouc. The apartment building is designed as a detached building with three above-ground and one underground floor. Part of the land where the apartment building is designed is flat. There are a total of 8 residential units in the apartment building, while the apartments on the 1st floor have a large terrace with a separate garden, the apartments on the 2nd floor have a spacious balcony. On the 3rd floor there are only two residential units, one apartment has a large terrace, the other has a balcony. Each apartment has its own cellar cubicle in the basement. There are also a technical and cleaning room, a bycicle and pram storage room and a meeting room. An elevator connecting all floors is designed in the building. The apartment building is based on concrete foundation strips, the vertical load-bearing structures in the basement are formed by permanent formwork. The load-bearing structures above the terrain are realized by brick blocks, which are insulated with the external thermal insulation composite system ETICS. Horizontal load-bearing structures are designed as reinforced concrete slabs. The whole building is covered with a warm flat roof with extensive vegetation. There are also other warm flat roofs in the building, one covering the entrance of the apartment building and the other forming a terrace. The whole building is designed as a building with almost zero energy consumption.
|
|
|
Apartment building
Fric, Marek ; Navrátil, Michal (referee) ; Kacálek, Petr (advisor)
This bachelor thesis processes documentation in the stage for the implementation of the construction for a new apartment building. The designed object is located near Prague, in the village of Dolní Lomnice u Kunic. The project adresses modernization and construction of the village center, which is planed in several stages. The building contains of five apartments and one underground floor in which storage, technological and common rooms are located. There are also cellars used for storage for each housing unit. The apartments are designed in very variable layouts ranging from 1+kk to 5+kk. In the first floor are located apartments with categories 1+kk, 2+kk and 3+kk. In the second floor are located apartmetnts with categories 5+kk (duplex apartment) and 1+kk. Each apartment is provided with a large terrace or balcony. Apartments in the first floor oriented to the northwest (east) also have a front garden. Apartment building is based on flat foundations of reinforced concrete monolithic slabs. The core of the object (stairwell and lift shaft) are also made of monolithic reinforced concrete walls. The load-bearing structures are designed as masonry from classic and sound-insulating brick blocks. Non-load-bearing are made either of brick blocks of thickness 140 mm or 80 mm, or as a lightweight SDK constructions. Object is insulated according to need by ventilated facade cladding and a system of green walls. The ceilling is made of reinforced concrete monolithic equipped with SDK soffit either directly anchored or suspended. The flat roof is vegetated, and partly made as a terrace. The windows and the outer door are made of aluminum and glazed with insulating triple glazing.
|
|
|
Construction Project for Implementation of Houses in Slavkov - Pod Zlatou horou
Kurková, Dita ; Venkrbec, Václav (referee) ; Nečasová, Barbora (advisor)
The subject of the diploma thesis is the solution of chosen parts of the construction technology project of the 1st phase of the construction „Komplex RD Slavkov, Pod Zlatou horou“. These are 4 semi-detached houses, overall 8 family houses. The work deals with technological regulations for the superstructure including roof, study of the realization of the construction technology project, design of the main construction machines and mechanisms and control and test plan. For the whole construction is elaborated time and financial plan in two variants, namely the gradual and current method of construction, and a detailed schedule for one semi-detached house. The technical report of the building site equipment is completed with the drawings, itemized budget of the building part of the house, noise study and specialization focused on the photovoltaic system, with an alternative solution to use solar collectors. The thesis also includes a case study of construction methods focused on the gradual and current method of construction.
|
|
|
Apartment building
Veselý, Karel ; Průša, David (referee) ; Brukner, Bohuslav (advisor)
The subject of this Bachelor thesis is a project documentation for construction of the building of the apartment house in Humpolec. The building is designed for housing, it has five overground storeys and a basement, with a lift. It contains seventeen dwelling units with access to the balcony and a possibility of own parking right in the building. The basement is largely made up of parking space – one collective garage with nineteen parking spots. The remaining part of the underground floor is made up of corridor, air conditioning engine room, room with electricity meters, room with cellars, utility room and cleaning room. On the other floors there are a total of seventeen housing units with layouts of 1+kk, 2+kk, 3+kk a 4+kk. The apartment building is based on reinforced concrete foundation strips. The vertical load-bearing structures are designed from ceramic blocks, in the basement from monolithic reinforced concrete are insulated with the contact thermal insulation system according to ETICS. The ceiling structures are monolithic reinforced concrete slabs, only above the apartment on the 5th floor, the load-bearing part of the ceiling is solved using wooden beams. Stairway is solved as reinforced concrete precast. The building is covered by flat monolayer roof.
|
|
|
The apartment house in Tišnov
Egerová, Tereza ; Krupica, Roman (referee) ; Krupicová, Jana (advisor)
The topic of the thesis is the design of new residential building in Tišnově. The aim is to develop detailed documentation for construction. The work includes studies, drawings, text and part of the calculation. It is a detached residential building with ground plan dimensions of approximately 13.5 x 37 m. The building has 4 floors and a flat roof. The building is made of ceramic bricks, ceilings are monolithic reinforced concrete. Roofing is made up of single shell flat roof. The building is located on undeveloped land in housing estates on flat terrain. Residential building contains 12 apartments, one of which is completely wheelchair. There are also 6 separate garages on the first floor.
|
|
|
APARTMENT BUILDING LÁNICE
Smutný, Jiří ; Pilinszki, Martin (referee) ; Brzoň, Roman (advisor)
This bachelor’s thesis outlines the development of project documentation for a new apartment building named “Lánice”. The apartment is constructed with an underground basement in addition to three above-ground floors containing a total of 9 residential units featuring several different layouts. The apartment building’s foundations are made up of plain concrete foundations strips. The ground floor’s vertical structural system consists of the “Best” formwork, while the aboveground floors make use of “Porotherm” cut brick blocks. All horizontal structures are monolithic and made with reinforced concrete. The ETICS contact insulation system is used to insulate the building. A flat, single-layer roof is used on this apartment building.
|
|
|
The apartment house in Horní Loučky
Šmídková, Michaela ; Krupica, Roman (referee) ; Krupicová, Jana (advisor)
The topic of the thesis is the design of new residential building in Horni Loucky. The aim is to develop detailed documentation for construction. The work includes studies, drawings, text and part of the calculation. It is a detached residential building with ground plan dimensions of approximately 13.5 x 16,75 m. The building has 4 floors and a flat roof. The building is made of sand-lime bricks, ceilings are monolithic reinforced concrete. Roofing is made up of single shell flat roof. The building is located on undeveloped land in housing estates on flat terrain. Residential building contains 5 apartments, one of which is completely wheelchair and one workshop (eg hairdressing). At the building will be constructed parking area for the residents of the apartment building and premises.
|
|
|
Samostatně stojící rodinný dům
de Ceita, Janet Klaudie ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The subject of this thesis is to design a detached single-family house. The aim was to create an object suitable for a five-member family by its disposition solution. The building is located in almost flat terrain on a specific plot of cadastral area of Brno city, Modřice Street Field. The house has two floors and no basement with vegetation roof. Part of the house is also a garage for two cars. The main entrance is oriented to the north. External as well as internal walls are designed in a technology of Heluz system. Ceiling above first above-ground floor is monolithic reinforced concrete. The project documentation which is needed for a realization of a new detached house in worked up with five structural details including. Drawing part was processed in a computer program AutoCad. The work also includes fire safety and thermos technical solution.
|
guest ::
